Any networked thermostats that offer web control?
Hi I am looking for digital thermostats that hopefully can only use two wires and can be wired in the boiler room and tied into ethernet wirh a web interface and programming. I would like to be able to program them all from one place or centrally turn them up or down? Any ideas, I need 8 therms and am afaraid this will cost a fortune but hope I am wrong. thank you
chris
Tekmar TN2
We've done a few and as far as web interfaces go, it is a good place to start as it is a bit easier to install than others.
~
There is the Uponor CCN, unfortunantly that will indeed cost a small fortune.
Datanab.com
http://www.datanab.com/controllers/automation.htm
ME
It's not so much a case of "You got what you paid for", as it is a matter of "You DIDN'T get what you DIDN'T pay for, and you're NOT going to get what you thought you were in the way of comfort". Borrowed from Heatboy.
I use a
x-300
http://www.controlbyweb.com/x300/
The remote sensors are DS18B20 1-wire tech. Alot of features and you can do some "basic" programming to make it do what you need to do.
I have one running a steam system for a 5 family.
Honeywell IAQ
The system runs on three wires but they do it all , Raise - lower and view room temperature on each zone , Adjust humidity settings and view outdoor temperature right on your smart phone or office computer .. Digital and touch screen room thermostats .. Home run or daisy loop the controls ...
I have enough experience to know , that I dont know it all
Ecobee
Try these. The also have an app for the I-Phone and are Wi-Fi
http://www.ecobee.com/
"The bitter taste of a poor installation remains much longer than the sweet taste of the lowest price."
This post was edited by an admin on January 22, 2011 9:30 AM.
