The Wall
Forum / Controls / 750mv honeywell valve
  • Post a Reply to this Thread

    750mv honeywell valve (4 Posts)

  • HEATON HEATON @ 9:51 AM
    Contact this user

    750mv honeywell valve

    on a vs820a1047: is polarity important on the placement of leads fr th generator to the valve? Also is 600 mv enough to function? new valve, 600 fr generator,pilot looks ok on inpinge, valve wont open!! frustrated over the hill svc tech still working, John THANX
  • Paul48 Paul48 @ 10:43 AM
    Contact this user

    GO

    to the top of the page....Resources.......The Library......Tim McElwain's Closet.
  • HEATON HEATON @ 11:38 AM
    Contact this user

    ok for 1 question

    charts are great for the performance troubleshoot but still need to know about polarity? thanx
  • Tim McElwain Tim McElwain @ 2:58 PM
    Contact this user

    Polarity does not matter

    By the way open circuit should be 750 millivolts and no less than 540.
  •  
Post a Reply to this Thread