The Wall
Forum / Buy, Sell, Barter / WTB: Ridgid 1210
  • Post a Reply to this Thread

    WTB: Ridgid 1210 (13 Posts)

  • Tom Tom @ 6:40 AM
    Contact this user

    WTB: Ridgid 1210

    These units are hard to find. I am looking for one working or not.
  • gennady gennady @ 4:31 PM
    Contact this user

    Treader

    I have rigid 802 for sale or trade to rigid 300 in Brooklyn. Let me know if interested
    Gennady Tsakh

    Absolute Mechanical Co. Inc.
    www.AbsoluteMechanicalCoInc.com
  • Tom Tom @ 7:47 AM
    Contact this user

    Small

    I want the 1210 or the 1215 because its small and easy to move. I have a 1822-I for big stuff.
  • heatpro02920 heatpro02920 @ 1:54 PM
    Contact this user

    Tom

    You can get a steel dragon 1215 for $629 shipped, I have a friend of mine that bought 3 of them and swears by them, I have ridgid 1210's, 1215's and 300s but do use the 1215 the most, its great for dragging up to roof tops for gas piping up to 1 1/2 ".. the 1210 is also nice but them gold dies are expensive hard to find and dont last terribly long, but for residential gas lines it cant be beat, it weighs about 50lbs.... I used to think it was easier to just use the hand held power unit but once you lug the oiler and the tripod its easier with the 1200's....

    anywya check out that steel dragon website, I have seen the 1215 for 629 and I paid almost 3000 for my 1215 ridgids... is it really worth it? I wish I knew about sdt when I bought my threaders...
  • Charlie from wmass Charlie from wmass @ 4:04 PM
    Contact this user

    all this time

    I thought the 300 was the shoulder carry threader. They make lighter ones? too funny.
    Cost is what you spend , value is what you get.
    cell # 413-841-6726
  • Tom Tom @ 5:56 AM
    Contact this user

    thanks heatpro

    For that kind of money I think I will give it a try. I am a Ridgid guy, but I am also a student of economics, mainly how much stays in my pocket.
  • Charlie from wmass Charlie from wmass @ 11:00 AM
    Contact this user

    Tom aside from the wise cracks

    I have been scanning craigslist with no luck near me. I know the Chinese ones sound tempting but for tools I need to work I would stick with Rigid or Rothenberger. Be patient and maybe get a rigid 700 for the mean time. between CL and ebay you should be able to find one.
    Cost is what you spend , value is what you get.
    cell # 413-841-6726
  • Tom Tom @ 6:46 AM
    Contact this user

    Its a hard find

    I have been watching local Craigslists and when I say local I mean within 400 miles of Vt and found nothing. I have a 700 and 1822-I and the hand set. The 700 is to much of a bother for me to actually use for the small jobs and to slow to use on the big jobs. I would trade or that thing anytime. I will keep searching
  • heatpro02920 heatpro02920 @ 11:27 PM
    Contact this user

    Tom

    I seen the sdt's best price is on ebay $629 shipped, like I said my buddy swears by them he owns 3 and you can tell they have been worked. He said he uses them for up to 1 1/4 all the time, I find most jobs are 1" and 3/4, I used to do a lot of 1 1/4" when we were doing a lot of oil tanks {not to many new oil tank installs around this way}. I do copper risers now but before we used to use threaded pipe to the ceiling on boilers for the return and supply, them days are also over, especially since we hardly do steam swap outs anymore...

    So now pretty much the only reason we thread pipe is for gas lines, and as soon as the cost of the gastite type materials come down that will also be a thing of the past...

    I was told by a ridgid rep that the std parts are interchangable with a lot of their stuff and they were made in the same places by the same machines... I know the company that does the repairs on my equipment told me he uses there die heads and mototrs unless some asks for ridgid brand specifically, he likes the stuff too... Like I said If I didnt own the ridgids already I would have sdt on the job, $600 vs $3000 is not a small difference..
    This post was edited by an admin on March 18, 2013 11:33 PM.
  • Ibrollin Ibrollin @ 11:08 PM
    Contact this user

    1210 for sale mint

    Ridgid 1210 for sale mint used a couple of times quit doing gas sticking with just plumbing side of company 1000$
  • sprinter sprinter @ 3:50 PM
    Contact this user

    At that sort of money

    I am really temped. I have 2 ridged 700 and 2 300.
    The automatic oiler would be real nice , I think I,ll give one a try unless anyone has had
    A bad experience ??
  • Stanz Stanz @ 12:02 AM
    Contact this user

    Ridgid 535

    I have a Ridgid 535 threader with stand, nipple chucks, & dies for 1/8"-2" pipe. The threader is in very good condition & is the newer looking model. I hardly use it simply because I don't have the space to keep it set up all the time ready to be used so its a pain to get it out & set it up. I can send pics to anyone interested. Make me an offer/trade...

    (I'm a master plumber 29 yrs old & about to start my own business finally after 11 yrs in the trade located just outside of Phila)
  • sprinter sprinter @ 8:20 AM
    Contact this user

    I might be interested

    I will send you a message with my email
  •  
Post a Reply to this Thread