The Wall
Forum / Strictly Steam / Vote for the EcoSteam boiler control project!
  • Post a Reply to this Thread

    Vote for the EcoSteam boiler control project! (2 Posts)

  • MarkS MarkS @ 11:52 AM
    Contact this user

    Vote for the EcoSteam boiler control project!

    I've entered my EcoSteam boiler control project into a competition sponsored by Phidgets Inc., who make the sensors I'm using for measurement & control. EcoSteam is an outdoor reset control that calculates boiler run time based on the heat loss of the building, and controls a Midco Low-NOx modulating gas burner to prevent short cycling on pressure.

    If you're on Facebook, please consider casting a vote for my project. Click on this link: EcoSteam Project

    Then click 'Like'. Thanks!
    Homeowner, Royersford PA | 1890 one-pipe steam system | 3009 sf | 3 floors | 14 radiators | Utica SFE5200S boiler
    NEW Midco LNB-250 Modulating Gas Burner | EcoSteam modulating controls | 70 to 300 MBH |
    607 sf EDR connected load | Operating pressure: 0.5 oz/in2
    Four main runs (insulated) totaling 135 ft in length | All Gorton vents on mains & rads |
    A Steam Odyssey | Odyssey 2 | A Steam Enthusiast's Outdoor Reset Control
  • Rod Rod @ 2:08 PM
    Contact this user

    Bump

    Just thought I'd give this a "bump" to the top of the list so people can see it.
  •  
Post a Reply to this Thread