The Wall
Forum / THE MAIN WALL / Thermostat
  • Post a Reply to this Thread

    Thermostat (10 Posts)

  • Andrew boiler Andrew boiler @ 4:32 PM
    Contact this user


    Hi I am having problems with my Honey well PRO Non-Programmable Digital Thermostat (1 Heat don't know when I will need to get new. Bat tiers I think it's hard wire can any one help me
  • Jamie Hall Jamie Hall @ 5:20 PM
    Contact this user

    Kinda tough to do

    when you give no indication at all as to what your problem is.

    Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England.

    Hoffman Equipped System (all original except boiler), Weil-McClain 580, 2.75 gph Carlin, Vapourstat 0.5 -- 6.0 ounces per square inch
  • SWEI SWEI @ 5:35 PM
    Contact this user

    This is the 12th thread you've started in one week

    about your thermostat.  WTF?
  • BobC BobC @ 6:15 PM
    Contact this user


    Two wires AND a knob, no end of mischief can come from something like that.

    Smith G8-3 with EZ Gas @ 84,200 BTU, Single pipe steam

    Vaporstat with a 12oz cut-out and 4oz cut-in

    3PSI gauge
  • Zman Zman @ 6:20 PM
    Contact this user

    Buck up

    I think you either need to give a complete description of the components and the issue you are having or buck up and do some reading.
    No one can help you if you are not specific.
    A drawing would help.
  • Andrew boiler Andrew boiler @ 6:28 PM
    Contact this user


    I posted having problems with my PRO Non-Programmable Digital Thermostat (1 Heat

    I have my own zone in my master bed room and it's saying it's 71 in my room it's set at 68.

    Is there anything I can do to save service man to come on a Sunday?
  • Weezbo Weezbo @ 7:24 PM
    Contact this user

    over shoot...

    it may just be that the boiller fired off and it ran the heat into the room and it is now there trying to get out the emitter as quick as it can , if you are in an apartment buildingg most likely you are thinking to open a window ...dont. it is probably not your thermostat per se.
  • Zman Zman @ 6:30 PM
    Contact this user


    What is the other end of the wire attached too?
    Do you have and know how to use a multimeter?
  • Andrew boiler Andrew boiler @ 6:33 PM
    Contact this user


    No I don't know how to use a multimeter
  • Zman Zman @ 6:37 PM
    Contact this user

    What happened

    When did it stop working?
    Is this a new t-stat?
    The wire goes to your mechanical room. Can you post a picture?
Post a Reply to this Thread