Heating Help

jerry

@ October 24, 2006 11:40 AM in Prayers for Jerry Jubinville (JERRY HAS PASSED)

Thanks. The thoughts and prayers mean so much. Jerry is at home but in bed most of the time. However he has to get up long enough to read the Wall each day.

oil tanks

@ September 19, 2006 1:45 PM in Sizing Oil Tanks

Our area of western mass allows 1320 gal. We put in four 330 gal tanks.

Insulation

@ September 9, 2006 2:36 PM in Onyx revisited

I have done many jobs that the contractor used foil faced urethane in 1" or sometimes 2" under the onix' My kitchen has 1" against the top cord of the tji joists with pb tubing above

Insulation

@ September 9, 2006 2:34 PM in Onyx revisited

I have done many jobs that the contractor used foil faced urathane in 1" or sometimes 2" under the onix' My kitchen has 1" against the top cord of the tji joists with pb tubing above

Drop Header

@ September 5, 2006 4:54 PM in Bill and Alex's excellent drop header...

I think it's pretty also and I think Alex is a good friend of a lot of the wetstock bunch. Jerry

@ June 25, 2006 3:39 PM in Oilstock 2 Photos! (Steamhead)

oilstock trip

@ June 18, 2006 11:29 AM in Wallies at Oilstock?

Bill, Street atlas says my distance is 307 miles. From willington it's 268 miles. Jerry

oilstock

@ June 17, 2006 8:46 PM in Wallies at Oilstock?

Ruthe and I will be there. Mass is further than Ct. Jerry

Munchkin install

@ May 26, 2006 3:03 PM in installig my first munchkin

Pipe the boiler by the instructions with the vison package unless HTP has corrected the instructions in the manual. Jerry

Fast pass

@ April 3, 2006 8:39 PM in Speedpass

Guy, There is one on the garden state parkway that says to maintain speed . We went through at 65. Its off to the side of the other toll booths. Jerry

@ March 15, 2006 5:09 PM in NCAA Challenge

I'm in. Go CT or maybe BC

Bless your Mom

@ March 4, 2006 4:36 PM in The Final Hours are here

God Bless your mom and all of you that helped her to have a life that was full right up to the end. You wil soon be able to remember the times that she spent in the last few weeks doing the things that made all of you a family. Let her go in peace. Ruthe and Jerry

@ January 13, 2006 4:15 PM in Glenn Stanton Update

Take your time and really really get recovered. Ruthe and Jerry

Pumping away

@ November 4, 2005 3:13 PM in When did you start \" pumping away \" ?

Back probably in the 70's Crane came out with a boiler with thr circulater mounted on the top front whivh was the supply

Radiant heat

@ September 30, 2005 9:36 PM in radiant heating

I have put radiant heat off a baseboard loop and had it work well. Send me a e-mail address and I will send you a diagram. I don't know how to add a diagram here. Jerry

Tarm boiler

@ September 13, 2005 2:33 PM in Wood Bolier Overheat Protection

On a power loss, the fan stops and the fire very quickly dies down. We usually have one of the larger zones start circulating if needed.

So do I .

@ September 12, 2005 7:18 PM in PLEASE READ (Dan H.)

Rheem boiler

@ September 11, 2005 12:40 PM in Rheem Boiler

I know of one 007 that has been running all the time since 1990.

No apology necessary

@ September 9, 2005 6:24 PM in Apologies to Mr. Jubinville

We really enjoyed meeting and talking to you. I hope we get a chance to see and talk to you in the near future. Jerry & Ruthe

gas networks

@ September 6, 2005 1:50 PM in Gas Networks Fall Conference

We'll be there tomorrow afternoon. See you then. Ruthe & Jerry

Dan

@ August 1, 2005 9:18 AM in Lets hear it for the WALL

Thanks Dan! Ruthe & Jerry

pictures

@ June 10, 2005 4:11 PM in BEAN, GIL'S WHEEL, GOOD MEN, AND ME (Dan H.)

will send some email and then put them on a disc tonight Ruthe