Heating Help

3-wire surface aquastat cross

@ August 12, 2010 3:29 PM in 3-wire surface aquastat cross

I'm looking to cross what looks to be a Minneapolis-Honeywell 3-wire surface aquastat.  Label plate says : L109A1X1, also says use on Series 10 controls only.  Any ideas on what else I could use ???

thanks,

Steam boiler explosion this morning

@ March 13, 2008 2:22 PM in Steam boiler explosion

Lucky no one was killed. http://www.kktv.com/home/headlines/16642361.html Shaun

thank you

@ December 7, 2007 1:02 PM in Pool area

I will give them a shout. Shaun

Pool area

@ December 7, 2007 9:53 AM in Pool area

Need help locating a manufacturer of baseboard or radiator that can be installed in a pool area, any ideas ???? Shaun Anderson

thanks....

@ July 12, 2007 1:50 PM in Radiant Heat Panels

I found a local disto in my area.

Looking for Radiant Heat Panels.

@ July 12, 2007 12:57 PM in Radiant Heat Panels

I am looking for the underslab insulation that also has the grooves to pop in 1/2" heat pex, can you refer me to a manufacturer that does this please ? Shaun

Sorry Sir.

@ March 29, 2007 9:32 AM in Hydronic Heating System

I did not mean to start a thread that was unappropriate to post. My sincere apologies sir. Shaun

Most famous heating system

@ March 28, 2007 4:38 PM in Hydronic Heating System

What are some of the wallies most famous heating systems ? I was wondering if any of the wallies have done heating systems for someone famous, either a movie star or a sports athlete. I seen "King" LeBron James is having a 35,000 sq ft. house build for him and trying to imagine the heating system in that house. Shaun Anderson

@ March 6, 2007 7:08 PM in What should my Delta T be ???

Grundfos UP26-64F is what both Bock recommends and Viessmann also for their equipment. We plan on replacing the tank with Bocks new SideKick unit. I have other jobs with the same boiler but 80CT and they work just fine. Could the heat-exchanger be caked with sediment on the outside of the heat-exchanger ??? Shaun Anderson

@ March 6, 2007 7:04 PM in What should my Delta T be ???

These reading are from the supply and return of the heat exchanger. The well for aquastat is replaced with Viessmanns DHW sensor and the boiler was reading tank temp while I was checking the temp through the heat exchanger. When we did drain the tank some sediment came out but very little. I was thinking the heat exchanger could be calsavide but I have no one to check. Any ideas ??? Shaun Anderson

What should my Delta T be ????

@ March 6, 2007 6:19 PM in What should my Delta T be ???

I have a Vitodens boiler, 15-60, hooked up to a Bock 119CT and I have a few questions. Tank setpoint is set @ 136 degrees and feeding the indirect with just 167 degrees max. We drained the tank 3/4 of the way down and filled it back up, tank temp was 73 degrees when I started my testing and with a Fluke temp guage on the supply and reurn my Delta T was just at best 9 degrees. Should I be seeing a better Delta T ?? In 40 minutes my tank temp went from 73 to 106 degrees all while my Delta T dropped. When the tank gets above 115 degrees the Delta T is no more than 2 degrees !!!! The reason for this post is because the Bock is always calling for heat and we can't find out why. Maybe some of you wallies can help me out. This job is around three years old and on well water. Thanks Shaun Anderson

Not so much luck ...

@ January 17, 2007 4:01 PM in Patriots

but they have been playing down to their competition. The defense has been real shakey since losing Mike Brown / Tommy Harris. Even with guys stepping up like Mark Anderson ( THE REAL ROOKIE OF THE YEAR ) and Tank Johnson and Ian Scott, the defense still can't get any pass rush and when they blitz the corners get burned on the quick slants. I've been a Bears fan since birth, my dad's family is from Rushville, IL and I live currently live in Colorado Springs,CO. Not hold enough to see the Best Denfense Ever ( 85 Super Bowl Champs ) but maybe this could be our year for Bears fans. I will have my Devin Hester jersey on Sunday hoping for a great game. GO BEARS !!!!!! Shaun Anderson

First of many to come .......

@ November 10, 2006 4:58 PM in Like a kid in the candy store !!!!!

This is my first Vitocrossal sold and I can't wait to see this excellent piece of equipment in action. I will keep you posted on the progress of the job with before and after shots. This just arrived today and the job should get started in a couple of weeks. This is for a 45 unit complex running baseboard, off an old fire-tubed 1.8mil boiler and two commercial gas water heaters. With Bruce Faul's, Shamrock Sales and Viessmann's help we down sized to a 1 million btu to run the heat and domestic water. Shaun Anderson

Thank you !!!

@ October 28, 2006 9:28 AM in Taco Zone Control box

This is what I needed, thanks again Shaun

Taco Zone Control box

@ October 27, 2006 8:49 AM in Taco Zone Control box

Is it possible to run Honeywell's VC series zone valves in a Taco Zone Control ? These zone valves have five wires and not sure if we can still use the Taco box. Shaun

Bingo !!!

@ September 19, 2006 8:42 AM in Mystery Part ???

After discussing with my contractor, thats exactly how the actuator is set up. He found the compressor and had that fixed and sounds like everything is back to normal. Thanks to Terry and all the Wallies. Shaun

Could I find info on that in the library ?

@ September 18, 2006 2:08 PM in Mystery Part ???

I'm just looking to get something to show my contractor since I have no clue what he is up to. Shaun

My main question is .....

@ September 18, 2006 11:33 AM in Mystery Part ???

How do we adjust this thing ? Shaun

Mystery part of a old steam system ......

@ September 18, 2006 11:03 AM in Mystery Part ???

Can anyone help me identify what this is ? The center seat is made of wood and outer gasket is felt. Off a old steam heat system and ties into the globe valve somehow my contractor said. Any ideas what it is and how it works ? Shaun

Thats funny stuff !!!!

@ August 9, 2006 7:03 PM in Tragic office accident...

Hows daddy Frenchy doin ? Tell Courtney I said, Whatzz up !! , and we miss her at the " Rock ". Shaun

Nightmares !!!

@ August 9, 2006 6:55 PM in Green Mechanical Systems

Reminds me of the scene in Stephen Kings Creepshow after he found what he thought was a meteor and turned completly into a plant. Anyone remember that movie ?? I still get scared when I see wooden crates, especially under stairs. Shaun

Thats great news !!!

@ August 8, 2006 9:21 AM in congradulations Dan

May everything run smooth for you and your family. Shaun