Heating Help

Check with...

@ January 30, 2004 6:38 PM in Wetheads, Check out this project. MN

The deck manufacturer. They generally partner up with an insulation manufacturer. ME

Welcome back Cheese!

@ January 27, 2004 7:09 PM in Back in the saddle......mk

Good to see your words again. We missed you. ME

Wanted, Inventory Control Software

@ January 22, 2004 3:22 PM in Inventory Control Software (ME)

And it doesn't have to be FREE! Any of you Wallies have any experience with such a beast? Likes, dislikes etc... We're on a mission... TIA ME

Fuel savings with condensing technology

@ January 19, 2004 1:54 PM in munchkin 140 quote $8500, reasonable?

is typically 30 to 50 % for a gravity conversion system. I realized a 30% reduction on my house, and I replaced what is considered a relatively high efficiency atmospheric appliance. Replacing like for like appliances is not going to show any fuel savings unless some sort of control logic (outdoor reset) is applied at the same time. ME

1/4 \" ID

@ January 13, 2004 12:54 PM in Constant Tension Clamps for SolarRoll

Thanks anyway:-) ME

Wanted...Constant tension clamps for SolarRoll rubber tubing...

@ January 12, 2004 3:27 PM in Constant Tension Clamps for SolarRoll

We're rebuilding a delicate system and my partner said he thought he'd seen some constant tension clamps available on some newer Solaroll systems. Any one know of a source of supply? TIA ME

The problem is....

@ January 9, 2004 4:13 PM in how good is the munchkin?

Not all "pros" KNOW their controls, and this is not meant to be a negative towards you Josh. When a group of contractors met a long time ago setting the goals of HTP and the Munchkin, we asked for exclusivity to prevent another GlowCore disaster. We originally wanted certification just to purchase the boiler. Instead, exclusivity was given to the proprietary control logic, and I still think rightfully so. If you want to play, you have to pay, and MUST be certified. It is well worth the price of admission. JMHO ME

Stack vs Flue...

@ January 9, 2004 2:07 PM in Problem on \"CO again\" post

versus breaching. I've always been under the impression that the connector between the combustion chamber and the relief hood was called the breaching, and that anything after that is consider flue, or stack. Timmie, Jim? ME

Jim Davis

@ December 31, 2003 3:23 PM in CO speaker for ISH-NA

No offense to Rudy, cause I don't know him. Jim Davis would open some eyes and ears. ME

Makes sense

@ December 30, 2003 9:05 AM in My Ultimate heating system (ME)

I guess the thermal potential of feces is not that high... Instead, maybe I'll go with the GFX heat exchanger, and a small sewage lift station to recirculate the hot water and extract as much thermal energy as possible, as opposed to giving it just "one look" as it currently gets. HMMmmm, thanks for the brainstorm Duncan. ME