paul lessard
Joined on July 31, 2004
Last Post on November 9, 2006
Recent Posts
yea
@ November 9, 2006 9:22 PM in Bad job pics
IT'S what you think. To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"nadine and paul will attend
@ November 7, 2006 11:17 AM in MEMORY LANE (Dan H.)
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"every boiler gets one
@ October 17, 2006 12:26 PM in An apperance by Bonesy
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"on natural gas too
@ August 23, 2006 10:07 PM in Propane fired Vitodens....(revisited)......hb
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"wow I almost missed this!
@ March 30, 2006 8:51 PM in OIL HEAT CARES AUCTION
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"deal me in
@ March 30, 2006 8:50 PM in OIL HEAT CARES AUCTION
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"very nice
@ October 22, 2005 7:03 PM in Calculation of Extra BTUs needed to increase steam psi
thanks that was a good read. first time i heard of "poor boilering" I like it To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"check out the trade show to the left
@ October 21, 2005 10:36 PM in Steam Boiler Sizing
go to burnham and check out the ratings,I would go with the guy who measured the rads.I think would be even smaller! To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"It's sad
@ October 21, 2005 10:20 PM in Peoples Republic of Gassachusetts
when I look at the most recent modifications they seem clear as a bell, but I can see how the confusion can exist for the lazy reader(inspector,contractor whoever) example: the very first topic on my revision page clearly deals with conversions and states "shall be equipped with a manually reset device that will automatically shut off the gas to the burner in the event of a sustained back draft" if you don't know what that is or think somehow it has to to with horizontally vented equipment,you should not be an inspector. or how many times have you heard that you can't vent below 7 feet? the worst part is there's a natural draft boiler/ water heater spilling like mad on every street in the commonwealth and no one seems to notice! To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"too funny
@ October 21, 2005 10:04 PM in Peoples Republic of Gassachusetts
> Last I heard, what Scott said was right. The> code does not say that the co detector should
> break the electrical circuit. It doesnt even say
> hard wired.
>
> Unless it changed again then I
> 'm wrong.
>
> _A
> HREF="http://www.heatinghelp.com/getListed.cfm?id=
> 343&Step=30"_To Learn More About This
> Professional, Click Here to Visit Their Ad in
> "Find A Professional"_/A_
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
so you still need a co detector
@ October 14, 2005 11:08 PM in MA Gasfitters and gas heating installers!
Where's the big story? and you CAN put the highest efficiency equipment in a doghouse without a detector[exemption b 2 ].poor dogs ,at least the poor dogs don't have to deal with draft hoods To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"hey jamie
@ October 13, 2005 10:56 PM in Steam main air removal?
Got to books and more,third one down.gerry gill and steve pajek put a nice pice together,have a happy heating season everybody! To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"Pass me another
@ October 7, 2005 9:56 PM in Old School Thermal Solar question?
Margarita and we'll talk about it! You must be the paul lessard that has all the fun Wait a sec???I'm related to the weezbo? I knew it! To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"stain eraser
@ October 7, 2005 9:21 PM in extracting a recent rust stain from enamled porcelain
It's sold at plumbing supply houses,looks like a 1/2..x..1..x..2 inch rock and it works well. I've got some here if you want one To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"watts no longer has it
@ October 1, 2005 10:31 AM in flat exp tank?
Any other ideas? To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"thanks Ernie
@ September 29, 2005 10:12 PM in flat exp tank?
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"I'm looking for a flat expansion tank
@ September 29, 2005 9:30 PM in flat exp tank?
Like the ones built into some boilers and pre-piped radiant boxes. thanks for any help To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"let me know if..
@ September 15, 2005 11:08 AM in Reverse thread 1 1/2 Bushings
you find any!! I've searched high and low.Good luck. To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"@ September 8, 2005 9:20 PM in Wanted....
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"steam
@ September 8, 2005 5:50 PM in Wanted....
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"I did the same thing today
@ August 8, 2005 10:22 PM in Met another hero
Joseph A poshefko. http://www.flyingtigersvideo.com/default.html..... flying tigers .He gave me freedom,I gave him a symmons valve . one of the most pleasant people i've worked for. He will be 90 this month.thanks joe To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"I know this is an easy one for you..
@ August 8, 2005 8:14 PM in Timmie..
I have a water heater with a junction block/spill switch that reads 17 on the fire side,5 on the terminal side but only 4 on the gas valve side of things. would anything but the j-block be at fault? thanks for ALL the help! paul. To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
