Heating Help

Pressure switch for Mark II

@ November 18, 2007 8:49 AM in Trianco Heatmaker(Teledyne Larrs)

Helpingothershelpthemselves(Ken Resnick) needs a little help. We are having some difficulties finding a replacement pressure switch for a Trianco(Teledyne Laars)Heatmaker Mark II. Hopefully the wallies can assist me in this . Thank You , Ken Resnick

Thank You

@ November 7, 2007 10:37 PM in For Sunrise Tech Institute Students.

Thank You for the very kind words , it was my pleasure. You guys were a blast and like sponges for information which I appreciate and enjoy . See you on Tuesday night for the next section. Ken Resnick helpingothershelpthemselves

Blown away

@ November 7, 2007 10:26 PM in For Sunrise Tech Institute Students.

I had the pleasure of attending a class ken taught on tuesday night. The content of the class was oil heating systems for home inspectors. Allow me to say WOW ! I attend many classes for continuing education credits for my home inspectors license , but this guy can surely teach. It lasted three hours but we all wanted it to go on all night , learning and asking questions... no one wanted to leave and it was near 9:00 pm. Thanks to him I certainly know I am now better prepared than ever to inspect and write reports for my home inspections. Thank You Ken Keep on doing what your doing .

Student

@ November 7, 2007 10:14 PM in BLAST FROM THE PAST

Prof, Glad to hear that! He is in the right place. I am sure he will be a fantastic technician when you get done with him . I need to contact you for that guided tour when time allows. Working all day , and now teaching 4 nights a week (2) at Boces and (2) in private Tech School in Hicksville. Talk with you soon ,hopefully. Your friend , Ken Resnick

Welcome back

@ November 5, 2007 8:14 AM in BLAST FROM THE PAST

Prof, Welcome back to Wallie Land . Ken Resnick

Great course , thank you

@ November 5, 2007 8:10 AM in For Sunrise Tech Institute Students.

Ken, Thanks for the great course , filled with knowledge , expertise and passion. I adored the props you taught us with. All the future reference information is also a winner. Looking forward to the next course you teach . Thanks again , homeinspectionone

Welcome to Sunrise Tech Institute Students

@ November 4, 2007 9:42 AM in For Sunrise Tech Institute Students.

For Sunrise Tech Institute Students, Welcome here to The Wall. Here you will you find the best of the best in our industry, thanks to Dan Holohan and so many . Get involved , read , post and most of all learn and enjoy. It was my pleasure to be your instructor on Saturday 11-3-07. We had lots of fun and learned a few things at the same time . For those enrolled in the course on 11-27-07 see you there . Ken Resnick helpingothershelpthemselves.

holding out ?

@ October 13, 2007 9:44 PM in Well, I did it...

She said its cold in here ....... I said lets snuggle........ She got out of bed and returned with an electric blanket. As she plugged in that wattage sucking device, She said and I quote " If you dont want to turn the boiler on , no problem , now you can go watch your electric meter spin at the speed of light" ! Ken Resnick

Welcome to The Wall

@ September 21, 2007 7:27 AM in To the students of Western Suffolk Boces- Oil I

A welcome to the students of Western Suffolk Boces, Oil I , Thursday night class. If you got here you got to the right place to learn from the best of the best in our industry. Read , post , get involved and enjoy. See you all on Thursday. Ken Resnick

@ September 14, 2007 8:02 AM in Boces ,Western Suffolk, Wilson Tech

Bump for students.

Welcome to \"The Wall\"

@ September 11, 2007 7:49 AM in Boces ,Western Suffolk, Wilson Tech

To all of the Oil Burner I students fall semester from Boces , Western Suffolk, Wilson Tech.... welcome here to the Wall. If you made it here ,your in the right place to learn from the best of the best in our industry. Wander around , look, read and learn , post and most of all have a great time here. Thanks to Dan H and all the wonderful people here , you have the opportunity to be among the industries most caring people. See you in class on Monday. Ken Resnick

Wilson Tech.

@ July 27, 2007 8:18 AM in wilson tech hydronic/ boiler class scheduled for fall

Mike , the hydronics and boiler installation course listed in the Fall catalog offered by Western Suffolk Boces, Wilson Tech. , is NOT my curriculum and is NOT being taught by me, therefore does NOT entitle you to any NORA credits. I am as confused as you are as to what purpose this course can serve. I saw and read the course content and it is much of what we did toward the end of the courses for Oil II as well Oil I . The nightime introduction to plumbing instructor, Joe, will be instructing this course. It may just be a pilot program , but not sure. I was not asked or consulted with in regards to it. For further information or "requests", it would be suggested to contact Boces directly @ 631-667-6000 ext.320 or ext. 470. You also know how to contact me if you wish . Sincerely, Ken Resnick

knowing why...........

@ July 12, 2007 7:24 AM in Evacuation of new A/C Units

Prof, He who knows why shall be master of he who knows how . Ken Resnick

As not to have hijacked Ron Jr's post

@ July 10, 2007 8:22 AM in Islip Speedway , Freeport Speedway

Off the Wall but seems to be of interest to fellow wallies. Photos from the old days at Islip Speedway (figure 8 division).Race team started in Freeport Speedway (bomber division) then on to Islip Speedway figure 8 division and steet stock division. Currently racing in Riverhead Raceway enduro division. For the interest of fellow wallies . Ken Resnick

@ July 10, 2007 8:02 AM in 5 section beastie and 550 gal. oil tank in closet ( Ron Jr. )

Also notice the X3 and x91 of Fred Harbach fame on the left of doorway. Take a real good look and you will see the original Freeport Speedway signage. Look to the right of that and you see one of the first signs for Islip Speedway Figure 8 division in which I raced until the close of Islip Speedway .By the way this year is the 25th anniversary of Ernie Maynor's death which occured on a terrible Saturday night at Islip Speedway. I was driving the #03 figure 8 car ,two cars behind Ernie when he hit the wall in his fatal crash. Ken Resnick

old beer

@ July 10, 2007 7:39 AM in Talk about dirty Jjobs!

As an apprentice for the families business it seemed it was always my calling to clean out the grease receptors and beer dispensors in the Red Lobster Restaurants. May not sound so bad until you felt the slime and got a real wiff of old rancid beer and grease . Dad would remind me that the white chunky grease and brown slimy beer by products were "GREEN" , as in money green $$$$$$. In the cab of the trucks was a sign he had placed in them .... it read "Keep America Green , Spend Money " Ken Resnick

@ July 9, 2007 7:21 AM in Long Island Big Ugly - July 7th at Louie's

The LI Big Ugly wasnt big or ugly. But what it was , was a great time. Mad Dog , thanks for all your work on setting this up. Pat and I had a wondeful time. As Dan said , great food , great friends ,the sunset and harbor was fantastic.

Ken & Pat will be there

@ July 3, 2007 7:38 AM in Long Island Big Ugly Roll call 7 July

Ken Resnick and Patty will be there . Thanks Matt for putting this together.

Sounds great

@ June 2, 2007 6:46 AM in Long Island Big Ugly - July 7th at Louie's

Hey Dog , Either way sounds great, Pat surely can devour a good White Zin. Ken Resnick & Patty

LI Big Ugly

@ May 18, 2007 8:07 PM in Starting to plan the Big Ugly ala Isle of Long!!!!!!!!!!!!

Matt, Any ugly will do, big or small , ugly or not , it will be great! We are still in for July 7 ! Ken Resnick & Patty

@ May 17, 2007 8:30 AM in In time of need.....Ask

Dave, Amanda and her family are in our thoughts and prayers each and every night. Another miracle will come her way with all the good people here pulling for her . Ken Resnick

@ May 15, 2007 8:53 AM in Boces Instructor Awarded Teacher of the Year

From what I am being told the awards banquet is by reservation through SACCE(Suffolk Association For Continuing Community Education) www.sacce.com The banquet is on Monday June 4th from 6:00pm-9:00pm. I sincerely appreciate all the kind and generous words. Its an honor to receive but most importantly its all about education and sharing of knowledge throughout our industry to prepare and recruit future well trained technicians. A thank you to Prof. Silberstein for visiting Western Suffolk Boces, Wilson Technological Center last night , it was a pleasure to meet you. Ken Resnick