Security Seal Facebook Twitter GooglePlus Pinterest Newsletter Sign-up
The Wall
Paulien

Paulien

Joined on March 16, 2010

Last Post on December 10, 2012

Contact User

Recent Posts

Ma. Plumbers:!! Need a used 4sec.oil-fired steam boiler

@ December 10, 2012 9:23 PM in Ma. Plumbers:!! Need a used 4sec.oil-fired steam boiler

Hi----  Plg. contractor located in Ma. looking for a decent 4-section Weil or Burnham Oil/Steam Boiler to get me buy for a few years til they'll open street to get gas..Will p/u..Thanks

Badly plugged sections

@ December 8, 2012 12:14 PM in Badly plugged sections

Hi Guys...Any advice to clean badly plugged up sections of a steam boiler?/ Tried the thin saw & brush on the sides but when I removed the jacket the top sections are cement like plugged in some areas..the little "nubs" are breaking off as I try to chip away..any liquid material to pour down to loosen up?  Thanks alot

Forced h.w. zone off new steam boiler

@ September 13, 2011 7:20 AM in Hot water zone off of steam boiler?????

Thanks Rod...the zone that is w/out the exchanger..have you any luck w/ this version..? & is this assuming that both zones are 1 as is the case w/ mine. If there both connected do I need a control for the hot water loop side?

Hot water zone off of steam boiler?????

@ September 12, 2011 8:53 PM in Hot water zone off of steam boiler?????

Looking for some tips on best way to adding a hot water zone below steam boiler's water line... without breaking the bank!!!!! Thank you guys.....

Plug removal from boiler

@ June 2, 2011 9:55 PM in Plug removal from boiler

Feel a little silly posting this.. however does anyone have a simple solution to removal of a plug in a new Burnham Boiler?? Don't know why they don't put a nipple & cap to make life easier..!!

Thanks

@ May 17, 2011 9:21 PM in Forced h.w. zone off new steam boiler????

Thanks for the tips,,have installed many a steam boiler,but never a h.w. zone off it..

Forced h.w. zone off new steam boiler????

@ May 17, 2011 6:09 PM in Forced h.w. zone off new steam boiler????

Best way to set this up w/ a NEW steam boiler? Pics. show former boiler & the zone that was existing... Any feedback from any installers out there that have had successful results?! Thanks