Security Seal Facebook Twitter GooglePlus Pinterest Newsletter Sign-up
The Wall
LAG1VT

LAG1VT

Joined on January 23, 2014

Last Post on January 26, 2014

Contact User

Recent Posts

UBA

@ January 26, 2014 11:51 PM in Problem with fuse socket on Buderus GB142 UBA3

Mpj,
 Got your e-mail and responded. Still need the UBA

Contact

@ January 24, 2014 11:46 PM in Problem with fuse socket on Buderus GB142 UBA3

Yea I figured it out. Thanks for the recommendation to put my post on the Main Wall.

Thank You, Thank You, Thank You

@ January 24, 2014 7:34 PM in Problem with fuse socket on Buderus GB142 UBA3

That is fantastic. How best for you to reach me and get shipping information? Is it okay to put  an e-mail address in one of these replies? 

Problem with fuse socket on Buderus GB142 UBA3

@ January 24, 2014 6:46 PM in Problem with fuse socket on Buderus GB142 UBA3

Repair part for Buderus GB142 UBA 3
Hi ,

I have a UBA 3 V3.6 for a Buderus GB142 that needs to be repaired. The entire fuse socket
dropped down inside the enclosure when trying to replace the fuse. Is
there any way I can get a replacement part? The socket appears to just
push into the housing and make contact with the circuit board. That
is, there are no wires actually attached to the fuse socket that I can
see. Possibly someone out there that has replaced an old UBA V3.5 with
the V3.6 still has the 3.5 laying around. I would assume the fuse socket
is the same.

If anyone can help let me know.

Thanks for the help

@ January 24, 2014 11:25 AM in Repair part for Buderus GB142 UBA 3

Carl,
Part number 38345 is the "fuse holder". I have that part. Problem is the fuse holder (PN: 38345) plugs into a receptacle  in  the casing. The receptacle  is missing and there is no part number showing for this part.

When I was inserting the fuse holder  the receptacle literally  pushed in and dropped inside the box.

Larry

Repair part for Buderus GB142 UBA 3

@ January 23, 2014 11:50 PM in Repair part for Buderus GB142 UBA 3

Hi ,

I have a UBA 3  V3.6 for a Buderus GB142  that needs to be repaired. The entire fuse socket
dropped down inside the enclosure when trying to replace the fuse. Is
there any way I can get a replacement part? The socket appears to just
push into the housing and make contact with the  circuit board.  That
is, there are no wires actually attached to the fuse socket that I can
see.  Possibly someone out there that has replaced an old UBA V3.5 with
the V3.6 still has the 3.5 laying around. I would assume the fuse socket
is the same.

If anyone can help let me know.

Thanks

@ January 23, 2014 11:45 PM in Buderus won't run on generator

SWEI, thanks for the help.

UBA 3.6 repair part needed

@ January 23, 2014 10:46 PM in Buderus won't run on generator

Sorry ZMAN,
This is my first time on the forum and I guess I didn't do it properly. I will start a new post as soon as I figure out how to do it. I put it here because my whole problem started when my Buderus GB142 would not run on my generator during the recent power outages caused by the ice storms here in Jericho, VT. Recommended fix was to replace UBA 3 V3.5 with UBA 3 V3.6.  I got the 3.6 but the fuse assembly is damaged.

UBA 3.6 repair part needed

@ January 23, 2014 12:38 PM in Buderus won't run on generator

Hi ,
I have a UBA 3  V3.6 that needs to be repaired. The entire fuse socket dropped down inside the enclosure when trying to replace the fuse. Is there any way I can get a replacement part? The socket appears to just push into the housing and make contact with the  circuit board.  That is, there are no wires actually attached to the fuse socket that I can see.  Possibly someone out there that has replaced an old UBA V3.5 with the V3.6 still has the 3.5 laying around. I would assume the fuse socket is the same.
If anyone can help let me know.