Take a stroll through HVAC history in our Heating Museum. This section of our website preserves history and answers that so-important question: What the heck is that thing? Whenever you run across anything unusual, chances are you’ll find the old literature about it right here.
This document about the Limitations in Heat Output from Radiant Panels is from LaTart and Hutchinson of the Revere Brass and Copper Company, written in January 1949. Than...
This fascinating article about plastic pipe and radiant panel heating appeared in Domestic Engineering magazine during February of 1957. Shades of things to come!
On November 28, 1990, I heard Professor Thomas Engel, the inventor of PEX plastic, speak in Sweden. The occasion was the Wirsbo-PEX 10 Times Around the World celebration....
This document contains a series of interesting articles by Mills and LaTart of Revere Copper and Brass about radiant heat with copper tubing. It is not dated, but is most...
The Copper & Brass Research Association published this brochure in 1949. It tells the radiant heating story very well, and the installation photos are well worth a look.
This is an interesting article by F. W. Hutchinson, from Heating, Piping and Air Conditioning magazine, March 1946.
This is a case study from the A. M. Byers Company of Pittsburgh, circa 1945.
Here is a case study by A. M. Byers Company of Pittsburgh, circa 1945.
Ernest L. Blair, industrial engineer, Stone & Webster, describes a new building heated entirely by radiant floor and wall panels. This is from Power magazine, October, 19...
The Copper & Brass Research Association published this generic and easy-to-follow brochure in 1949. It contains some wonderful photographs of early installations, includi...